Showing posts with label cryogenic liquid delivery. Show all posts
Showing posts with label cryogenic liquid delivery. Show all posts

Thursday, August 20, 2009

Low-Loss Liquid Fill- What Price Success?

Companies delivering liquid nitrogen, oxygen, and argon are fortunate these days to have some choices:

a) Pumped Systems- many of which have low transfer loss features

b) Pressure Driven Systems- some with MC-338 options allowing them to travel under pressure without venting between stops.

c) Pressure Driven Systems with Gas Use Capabilities- allowing them to be used not only for liquid delivery, but also for gas use for welding, purging, cutting, etc.

Which is best?

Of course- again we hit the millenium answer- It depends.

And it really does depend on what you are doing with the vessel- How much liquid you are delivering, what other uses (if any) you might have for the tank, and your budget.

The question crystallized after a client visit where it turns out they'd have been able to purchase two GOrilla 500s and a GOrilla 1500 (all tricked out with trailers) for what they paid for one low loss pumping truck. This is an irrelevant comparison where you need the pumping truck. Where you don't, it could be interesting to further explore where you get the most from your investment dollars.

Thursday, April 2, 2009

Cryogenic Liquid Bulk Drops- Part III- Good for the Customer?


Having determined that bulk cryogenic convenience drops are usually a good thing for the vendor the question is “Are they good for the customer?” And, of course, comes the Millennium Answer: “It Depends.” So- what are the customer costs and benefits of convenience drops?

First- the potential negatives:

N-a) These drops are often commonly referred to as “dumps” where clients have a negative view. The biggest concern is that the liquid left in the transport is “hot” and will raise the temperature of the bulk tank receiving the product. In some cases a company is concerned that the transport has traveled from say Phoenix to Tucson to Albuquerque and back and now has 500 gallons they need to get rid of. When filling the delivery guy might blow down some of the pressure on the receiver of there might be a good deal of venting which could translate as wasted molecules. Or- the liquid did, in fact, heat the tank up a little it might cause product to boil off faster and there would be a net loss of product.

N-b) Most bulk agreements also include a “per delivery” fee and it is undesirable to be billed a delivery fee for partial drops.

N-c) There can occasionally also be logistics issues arising from getting a partial delivery on Tuesday when the regular delivery is Thursday resulting in less than a full drop on Thursday.

All these things can result higher total cost of goods.

And the potential positives:

P-a) A well placed client working closely enough with their supplier could see some significant cost savings if they are lucky enough to be strategic. This is especially true if the supplier is trying to expand into new territory and the client has a large enough tank to receive most of the excess product the transport might ever have. This could result in both good upfront pricing from the supplier and some waivers for delivery or other fees that significant reduce the total cost of liquid oxygen, nitrogen or argon.

P-b) A strong enough relationship (and big enough cryogenic bulk tank) could also almost eliminate the need for scheduling deliveries triggered by getting down to re-order levels.

P-c) And then there is the whole aspect of operating closely enough that “the right hand washes the left” where doing each other favors benefits both the supplier and client.
Jim Sherrow was one of my most influential members and he’d regularly point out that it is critical not to let the Aggravation Factor exceed the Incremental Dollar. Mostly he meant this as career counseling, but it also applies to relationships of convenience.

Thursday, February 19, 2009

Is Microbulk Cultural?


Seven or eight years ago U.S. Manufacturers were told that there would be no real reason for them to do much in the way of 250-500 gallon vertical bulk tank production. Reasons given included plentiful stocks of used equipment and the inability of suppliers to economically justify small volume cryogenic liquid deliveries. Yet, During the past few years, sales of microbulk vessels in the 1000 to 2000 liter range have been strong. These are the same sized vessels just packaged differently.

This might be ironic except for the fact that “Nature abhors a vacuum.” And- just because a major producer of liquid oxygen, nitrogen and argon has a business model that focuses their efforts on deliveries of 1500 gallons or more does not preclude the need of users. Posed with the question of how to fill the gap from liquid cylinders to 1500 gallon bulk tanks one producer eloquently responded “That’s what distributors are for.” And in the U.S. this has proven largely true.

Interestingly enough, though, I was informed that some of the same companies who have 1500+ models in the U.S. are actively involved in establishing a microbulk presence in Europe and Asia. Part of the answer given for this is a cultural aversion in other countries to soliciting a competitor’s clients for nearly identical services. For example- If Manufacturer X is buying 20-30 liquid nitrogen cylinder exchanges per month then it might be considered unseemly for a competitive supplier to come in and offer to provide the same service at a lower rate. But- A competitive supplier who offers the same liquid in a different package is offering an alternative that changes the rules of the game.

I’m told it would still be “unseemly” to go out directly soliciting microbulk business as an alternative, but there are means of finessing the approach so that the client calls the supplier to initiate discussion. Economic presentations at trade shows, article publication, web posting and general advertisement all become fair game along with referrals from other happy clients. Overall, this is sort of a retail walk-in approach to engaging clients vs. a more active direct approach in the U.S.